What you need before you start
Higgsfield has two house models for motion work, and the names are close enough to confuse a brief. Genjutsu Light transfers motion onto reference characters and scenes, reads the first 15 seconds of the source video, and keeps the audio of that source. Genjutsu replaces characters, places and styles inside a video while keeping the movement. The API platform open.higgsfield.ai, read on 16 November 2026, lists Light from 0.074 dollars a second and Genjutsu from 0.154.
The material you need differs with the model. Light needs a source clip for movement and a reference for the character or scene that receives it, which means two inputs and one decision about which part of the clip carries the performance. Genjutsu needs a source clip and a direction for the new world, because characters, places and styles are all in scope.
The last prerequisite is the shortest. Fifteen seconds is not a suggestion on Light, it is the window the model reads. A source clip of 40 seconds does not give a longer transfer, it gives 15 seconds of transfer and 25 seconds of nothing.
How the job is done with Higgsfield
Start with the question the shot answers, because it picks the model.
- Keep my actor and my location, borrow the movement, and the job is Genjutsu Light.
- Keep the movement, change the world around it, and the job is Genjutsu.
Then cut the source before the upload. On Light the first 15 seconds are the ones that count, so the segment you care about has to sit at the head of the file. Trimming there is not a cosmetic step, it is the difference between a transfer of the right performance and a transfer of the wrong one.
Then prepare the receiving material. On Light that means the reference character and the reference scene, both chosen for what the camera will see, since a reference that only works in a close up will not survive a wide. On Genjutsu it means a written direction for the replacement, covering who the characters become, where the scene moves to, and what style the frames should take.
Then run and compare side by side with the source. The comparison is not about beauty, it is about whether the movement pattern of the source survived and whether the receiving material held its identity across the full length.
One practical note on the source. Light keeps the audio of that source clip, which makes it the natural path for a performance with a voice, a beat or a line of dialogue that has to stay in sync. The API listing for Genjutsu says nothing about audio, so a job that depends on sound belongs on Light.
On this page
What to check in the result
Check movement first, at the joints that matter in the source. A gesture that started on a beat should still start on that beat. A turn that took two seconds should still take two seconds.
Check identity second. The reference character should be readable in the widest frame of the clip and not only in the close up. The reference scene should hold its layout, because a transfer that rebuilds the room every two seconds is a reference problem rather than a motion problem.
Check the ceiling third. If the source ran longer than 15 seconds and the output stops at the same point the window does, the model behaved as listed and the brief was written too long.
Check audio last, and only on Light. If the source carried a line of dialogue, the output should still carry it. If the output arrives silent, the job needed the sound added in the edit.
Where it usually goes wrong
The repeated failure is a 60 second source and a plan built on 60 seconds of transfer. Light uses the first 15 seconds of the source. Everything after that is outside the job, so a long take has to be broken into segments and each segment has to lead with the performance it needs.
The second is choosing Genjutsu when the reference was the point. Genjutsu replaces characters, places and styles, which is the opposite of keeping a specific actor in a specific room. If the actor has to stay, the model is Light.
The third is comparing the two rates as if they buy the same thing. Light starts at 0.074 dollars a second and Genjutsu at 0.154, so the second is a little over twice the first at the entry price, and it buys a different operation rather than a better one. A brief that does not need the scenery replaced is paying for work it will not use.
The fourth is leaving ratio and duration to the end. Both are set before the run on this pair of models, and a transfer re-cut afterwards loses the timing that made it worth doing.
What the plan allows
The pricing page, read on 7 November 2026, lists Starter at 19 dollars a month with 270 credits, Plus at 59 dollars with 1,200 credits, and Ultra at 129 dollars with 3,000 credits. Billed yearly, Plus is 47 dollars a month with an announced 144 dollar saving, and the 3,000 credit Ultra tier is 99 dollars a month with an announced 360 dollar saving.
The credit marker the page gives is approximately 14 credits per video and 2 credits per image. It is a catalogue wide order of magnitude, not a per model quote, so a motion job at 15 seconds should be planned from the balance rather than from a fixed credit count that no source here provides.
Two limits apply under the grid. Unlimited models and the free generations included in a plan work on higgsfield.ai only, not through MCP, the CLI, Canvas or Supercomputer. Unlimited usage can also take dynamic speed adjustments at peak hours. The Higgsfield plans page carries the current grid for both billing modes.
What we did not do
No Higgsfield account was opened for this page, and no motion transfer was run on either model. The rates, the 15 second source window, the preserved source audio and the replacement scope are the ones published on the API platform on 16 November 2026. Plans and credits are the ones on the pricing page read on 7 November 2026. Accuracy of a transfer on real footage, render time and a per clip credit count for either Genjutsu model were not measured here, because no test was run.
Sources
- open.higgsfield.ai, read 16 November 2026, for the Genjutsu Light and Genjutsu rates, the 15 second source window, the preserved source audio and the replacement scope.
- higgsfield.ai/pricing, read 7 November 2026, for the plan grid, the credit marker and the limits under the grid.
- higgsfield.ai/terms, updated 23 October 2026, for commercial use of generated output and its survival after cancellation.
The plans, the credit conversions and the current campaign sit on the Higgsfield price page, and the full review is at /reviews/higgsfield/. ## Update log
- 16 November 2026. Page written from the pricing page read on 7 November 2026 and the API platform read on 16 November 2026. No account was opened and no transfer was run.